3528 chip LEDs on a flexible, 3M self adhesive strip for easy installation. They are perfect for simulating daylight in a window, garage strip lighting, scenics, railways, model railway buildings and other tiny models. They are very bright for their size.
They run off a 12 volt DC regulated transformer or a 9v PP3 battery but 9v option will be dimmer.
- 2m of strip (3 LED strip is 50mm long, 6 LED strip is 100m long, each in increments of 50mm)
- Wide angle, 120 degree LEDs
- strip 8mm wide by 2mm deep
- Bend radius of 20mm
- LED type: SMD 3528
- Non-waterproof
12 volt option wires in directly. For 9 volt option you will need a 9v battery snap. You can run one or two strips off the one 9v/PP3 battery but the more strips you connect the quicker the battery will run down.
These are supplied without wires. You will need to solder wires on yourself or use a LED strip connector. Pre-wired LED strips are also available.
Available in:
Warm white (slightly yellow cast), Bright white (cooler cast, more modern look), Blue, Green, Red
