1.8mm Flashing LEDs which are perfect for smaller projects such as OO or N Gauge railways or Warhammer kits. They have a special integrated chip so no external circuitry is required. The flash rate is 1.5Hz (1.5 flashes/second)
- 1.8mm pre-wired flashing LED
- 1.5Hz flash rate (1.5 flashes/second)
- Wire length: 10" standard wire
- High Brightness
These are provided with a resistor wired in to ensure both the LED and battery last longer. The resistor is usually near the plug end to unsure it doesn't get in the way.
For 3v you can use either a CR2032 or 2 x AAA battery kit but if you are using more than 4-5 LEDs in your circuit you would be best using our 2 x AAA battery kit to ensure nice and bright LEDs and consistent results.
Also available in a 4.5 volt, 6 volt, 9 volt and 12 volt option (with resistor wired in). Please select from the drop down menu.
***Please Note: If you wish to mix both solid and flashing LEDs from a coin cell battery you must run them off separate batteries otherwise there will be carryover of flash to the solid LEDs. AAA batteries are generally unaffected***
